NetBSD/zaurus
マルチユーザモードまで到達したよ。
NetBSD/zaurus booting ... [ Kernel symbol table missing! ] pmap_postinit: Allocated 35 static L1 descriptor tables Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 4.99.3 (GENERIC) #173: Sat Nov 11 16:17:24 JST 2006 nonaka@koharu:/usr/src/sys/arch/zaurus/compile/GENERIC total memory = 65536 KB avail memory = 59784 KB mainbus0 (root) cpu0 at mainbus0: PXA27x rev 7 (XScale core) cpu0: DC enabled IC enabled WB enabled LABT branch prediction enabled cpu0: 32KB/32B 32-way Instruction cache cpu0: 32KB/32B 32-way write-back-locking Data cache pxaip0 at mainbus0: PXA2x0 Onchip Peripheral Bus pxaip0: CPU clock = 415.996 MHz pxaip0: kernel is configured for PXA270, cpu type is PXA270 pxaintc0 at pxaip0 addr 0x40d00000-0x40d0001f: Interrupt Controller pxagpio0 at pxaip0 addr 0x40e00000-0x40e0014f: GPIO Controller com0 at pxaip0 a: ns16550a, working fifo com0: console com1 at pxaip0 addr 0x40200000-0x4020001f intr 21: ns16550a, working fifo com2 at pxaip0 addr 0x40700000-0x4070001f intr 20: ns16550a, working fifo saost0 at pxaip0 addr 0x40a00000-0x40a0001f saost0: SA-11x0 OS Timer pxapcic0 at pxaip0: 2 slots pcmcia0 at pxapcic0 pcmcia1 at pxapcic0 scoop0 at pxaip0: PCMCIA/GPIO controller scoop1 at pxaip0: PCMCIA/GPIO controller clock: hz=100 stathz=64 wdc0 at pcmcia0 function 0: <HITACHI, microdrive> wdc0: i/o mapped mode atabus0 at wdc0 channel 0 wdc1 at pcmcia1 function 0: <, , > wdc1: i/o mapped mode atabus1 at wdc1 channel 0 wd0 at atabus0 drive 0: <HMS360606D5CF00> wd0: drive supports 32-sector PIO transfers, LBA addressing wd0: 5859 MB, 11905 cyl, 16 head, 63 sec, 512 bytes/sect x 12000556 sectors wd0: drive supports PIO mode 4 wd1 at atabus1 drive 0: <> wd1: drive supports 1-sector PIO transfers, LBA addressing wd1: 7935 MB, 16122 cyl, 16 head, 63 sec, 512 bytes/sect x 16250976 sectors wd1: drive supports PIO mode 4 root device: wd1 dump device (default wd1b): file system (default generic): root on wd1a dumps on wd1b mountroot: trying ffs... root file system type: ffs init path (default /sbin/init): init: copying out path `/sbin/init' 11 Sat Nov 11 07:31:22 UTC 2006 swapctl: adding /dev/wd1b as swap device at priority 0 Checking for botched superblock upgrades: done. Starting file system checks: fsck_ffs: ioctl (DIOCGWEDGEINFO): Inappropriate ioctl for device /dev/rwd1a: file system is clean; not checking Setting tty flags. Setting sysctl variables: Starting network. Hostname: zaurus Configuring network interfaces:. route: writing to routing socket: Network is unreachable add net default: gateway gw: Network is unreachable Adding interface aliases: Building databases... Starting syslogd. Mounting all filesystems... Clearing /tmp. Creating a.out runtime link editor directory cache. Checking quotas: done. Setting securelevel: kern.securelevel: 0 -> 1 Starting virecover. Starting local daemons:. Updating motd. Starting inetd. Sat Nov 11 07:31:29 UTC 2006 NetBSD/zaurus (zaurus) (console) login: root Nov 11 07:31:33 zaurus login: ROOT LOGIN (root) ON console Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 4.99.3 (GENERIC) #173: Sat Nov 11 16:17:24 JST 2006 Welcome to NetBSD! This system is running a development snapshot of the NetBSD operating system, also known as NetBSD-current. It is highly possible for it to contain serious bugs, regressions, broken features or other problems. Please bear this in mind and use the system with care. You are encouraged to test this version as thoroughly as possible. Should you encounter any problem, please report it back to the development team using the send-pr(1) utility (requires a working MTA). If yours is not properly set up, use the web interface at: http://www.NetBSD.org/Misc/send-pr.html Thank you for helping us test and improve NetBSD. Terminal type is vt100. We recommend creating a non-root account and using su(1) for root access. zaurus# halt Nov 11 07:32:28 zaurus halt: halted by root Nov 11 07:32:28 halt: halted by root Nov 11 07:32:28 zaurus syslogd: Exiting on signal 15 syncing disks... done unmounting file systems... unmounting /tmp (tmpfs)... unmounting / (/dev/wd1a)... done