続 86Duino EduCake

NetBSD/i386 6.1.2 ておくれLive Image で起動した時の起動ログ。
なお COM ポートをコンソールにするには「PC実機+USBメモリ用イメージ」を USB メモリに書いた後に installboot -o console=com2 -o ioaddr=0x2e8 /dev/rsd0a /usr/mdev/bootxx_ffsv1 を USB メモリに対して実行する必要がある。

>> NetBSD/x86 BIOS Boot, Revision 5.9 (from NetBSD 6.1.2)
>> Memory: 639/129856 k

     1. Boot normally
     2. Boot single user
     3. Disable ACPI
     4. Disable ACPI and SMP
     5. Drop to boot prompt

Choose an option; RETURN for default; SPACE to stop countdown.
Option 1 will be chosen in 0 seconds.

Option: [1]:5
type "?" or "help" for help.
> boot -c
11257004+564156+464544 [600160+589606]=0xcdc114
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.1.2 (GENERIC)
total memory = 127 MB
avail memory = 112 MB
userconf: configure system autoconfiguration:
uc> change com2
[162] com2 at isa? port 0x3e8 size ? iomem ? iosiz ? irq 5 drq ? drq2 ?
change (y/n) ?
port [0x3e8] ? 0x2e8
size [?] ?
iomem [?] ?
iosiz [?] ?
irq [5] ? 12
drq [?] ?
drq2 [?] ?
[162] com2 changed
[162] com2 at isa? port 0x2e8 size ? iomem ? iosiz ? irq 12 drq ? drq2 ?
uc> exit
Continuing...
RTC BIOS diagnostic error 0x28<config_unit,fixed_disk>
mainbus0 (root)
acpi_probe: failed to initialize tables
cpu0 at mainbus0: Unknown Vortex86, id 0x601
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0: vendor 0x17f3 product 0x6025 (rev. 0x01)
ppb0 at pci0 dev 1 function 0: vendor 0x17f3 product 0x1031 (rev. 0x02)
ppb0: PCI Express 1.0 <PCI/PCI-X to PCI-E Bridge>
pci1 at ppb0 bus 1
pcib0 at pci0 dev 7 function 0: vendor 0x17f3 product 0x6011 (rev. 0x01)
pcib1 at pci0 dev 7 function 1: vendor 0x17f3 product 0x6011 (rev. 0x01)
vte0 at pci0 dev 8 function 0: vendor 0x17f3 product 0x6040 (rev. 0x00)
vte0: Ethernet address ff:ff:ff:ff:ff:ff
vte0: interrupting at irq 9
ukphy0 at vte0 phy 1: OUI 0x00d02d, model 0x0005, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ohci0 at pci0 dev 10 function 0: vendor 0x17f3 product 0x6060 (rev. 0x13)
ohci0: interrupting at irq 14
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ehci0 at pci0 dev 10 function 1: vendor 0x17f3 product 0x6061 (rev. 0x07)
ehci0: interrupting at irq 10
ehci0: companion controller, 2 ports each: ohci0
usb1 at ehci0: USB revision 2.0
pciide0 at pci0 dev 12 function 0: vendor 0x17f3 product 0x1012 (rev. 0x03)
pciide0: using irq 11 for native-PCI interrupt
atabus0 at pciide0 channel 0
atabus1 at pciide0 channel 1
hdaudio0 at pci0 dev 14 function 0: HD Audio Controller
hdaudio0: interrupting at irq 7
hdafg0 at hdaudio0: Realtek ALC262
hdafg0: DAC00 2ch: Speaker [Jack]
hdafg0: DIG01 2ch: Digital Out [Jack]
hdafg0: ADC02 2ch: Mic In [Jack]
hdafg0: ADC03 2ch: Line In [Jack]
hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, independent
vendor 0x17f3 product 0x1060 (USB serial bus, interface 0xfe, revision 0x03) at pci0 dev 15 function 0 not configured
vendor 0x17f3 product 0x1331 (undefined, subclass 0xff) at pci0 dev 16 function 0 not configured
vendor 0x17f3 product 0x1710 (undefined, subclass 0xff, revision 0x01) at pci0 dev 16 function 1 not configured
vendor 0x17f3 product 0x1070 (CANbus serial bus) at pci0 dev 17 function 0 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
com2 at isa0 port 0x2e8-0x2ef irq 12: ns16550a, working fifo
com2: console
pckbc0 at isa0 port 0x60-0x64
attimer0 at isa0 port 0x40-0x43
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279
npx0 at isa0 port 0xf0-0xff
attimer0: attached to pcppi0
isa at pcib1 not configured
uhub0 at usb0: vendor 0x17f3 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1 at usb1: vendor 0x17f3 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
umass0 at uhub1 port 2 configuration 1 interface 0
umass0: Generic USB2.0-CRW, rev 2.00/19.81, addr 2
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Generic-, SD/MMC, 1.00> disk removable
sd0: fabricating a geometry
sd0: 15296 MB, 15296 cyl, 64 head, 32 sec, 512 bytes/sect x 31326208 sectors
sd0: fabricating a geometry
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs