続々 NetBSD on uARM

uARM に CP14 の Clock Count Register を実装してみた。
とりあえず root device を聞かれるところまでは来た。何故か com(4) が見えてないな…。
さて、これからどうするか…。

switching to new L1 page table  @0xa01fc000...bootstrap done.
init subsystems: stacks vectors undefined page pmap
[ Kernel symbol table missing! ]
Loaded initial symtab at 0xc03a4094, strtab at 0xc03c22a0, # entries 7635
pmap_postinit: Allocated 9 static L1 descriptor tables
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.99.17 (UARM) #25: Thu Apr 25 01:38:29 JST 2013
        nonaka@koharu.myhome.local:/usr/obj.evbarm/sys/arch/evbarm/compile/UARM
total memory = 16384 KB
avail memory = 11336 KB
cprng kernel: WARNING insufficient entropy at creation.
mainbus0 (root)
cpu0 at mainbus0 core 0: PXA255/26x step A-0 (XScale V5TE core)
cpu0: DC enabled IC enabled WB enabled LABT branch prediction enabled
cpu0: 16KB/32B 32-way L1 Instruction cache
cpu0: 16KB/32B 32-way write-back-locking L1 Data cache
pxaip0 at mainbus0: Onchip Peripheral Bus
pxaip0: CPU clock = 4.287 MHz
pxaip0: kernel is configured for PXA250, cpu type is PXA250
pxaintc0 at pxaip0 addr 0x40d00000-0x40d0001f: Interrupt Controller
pxagpio0 at pxaip0 addr 0x40e00000-0x40e0006f: GPIO Controller
saost0 at pxaip0 addr 0x40a00000-0x40a0001f
saost0: SA-11x0 OS Timer
pxadmac0 at pxaip0 addr 0x40000000-0x400002ff intr 25: DMA Controller
pxartc0 at pxaip0 addr 0x40900000-0x4090000f: Real-time Clock
clock: hz=100 stathz=64
cprng sysctl: WARNING insufficient entropy at creation.
boot device: <unknown>
root device: