NetBSD/evbarm HDL-F への道 第一回
とりあえずここまで。/sbin/init を読み込んでダンマリになっている感じ。
Storlink Boot Loader, version 0.0.7 Built by cygwin, 14:09:55, Jan 6 2006 Processor: SL3316a3 CPU Rate: 162499999 AHB Bus Clock:108MHz Ratio:3/2 MAC 1 Address: 00:50:C2:11:11:11 inet addr: 192.168.1.2/255.255.255.0 Kernel RAM Location: 0x01600000 Filename: zImage Initrd RAM Location: 0x00800000 Filename: rd.gz Waiting for disk ready & detect ... Aborted by user! Boot Menu ============================================================================== 0: Reboot 1: Start the Kernel Code 5: Enter Command Line Interface 7: Set IP Address 7: Set MAC Address 8: Show Configuration B: Set Booting File I: Initialize IDE X: Upgrade Boot => Select: 5 sl-boot>tftp 192.168.1.1 get hdlf 0x00200000 .................................................... TFTP GET file at 0x200000, total = 1917568 sl-boot>go 0x00200000 Loaded initial symtab at 0xc03940fc, strtab at 0xc03b0d0c, # entries 6874 pmap_postinit: Allocated 18 static L1 descriptor tables Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 3.99.18 (HDL_F) #253: Sun Apr 16 11:14:54 JST 2006 nonaka@koharu:/usr/src/sys/arch/evbarm/compile/HDL_F total memory = 65536 KB avail memory = 59928 KB mainbus0 (root) cpu0 at mainbus0: FARADAY FA526 rev 1 (ARM9TDMI core) cpu0: DC enabled IC enabled WB enabled EABT cpu0: 8KB/16B 2-way Instruction cache cpu0: 4KB/16B 2-way write-back-locking-B Data cache slsoc0 at mainbus0: StorLink SL3316 SoC rev. a3 slsoc0: fclk = 162MHz, hclk = 108MHz, pclk = 27MHz slgpio0 at slsoc0 addr 0x21000000-0x21000047 gpio0 at slgpio0: 32 pins wdc0 at slsoc0 addr 0x52800000-0x5280003f intr 3 atabus0 at wdc0 channel 0 slcom0 at slsoc0 addr 0x22000000-0x2200003f intr 6 slcom0: console slrtc0 at slsoc0 addr 0x25000000-0x25000023 pci0 at slsoc0 bus 0 pci0: i/o space, memory space enabled pchb0 at pci0 dev 0 function 0 pchb0: Faraday Technology product 0x4321 (rev. 0x01) ohci0 at pci0 dev 9 function 0: NEC USB Host Controller (rev. 0x43) ohci0: interrupting at INTA ohci0: OHCI version 1.0 usb0 at ohci0: USB revision 1.0 uhub0 at usb0 uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1 at pci0 dev 9 function 1: NEC USB Host Controller (rev. 0x43) ohci1: interrupting at INTA ohci1: OHCI version 1.0 usb1 at ohci1: USB revision 1.0 uhub1 at usb1 uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ehci0 at pci0 dev 9 function 2: NEC USB Host Controller (rev. 0x04) ehci0: interrupting at INTA ehci0: BIOS has given up ownership ehci0: EHCI version 1.0 ehci0: companion controllers, 3 ports each: ohci0 ohci1 ehci0: run timeout ehci0: init failed, error=13 timer: hz=100 stathz=0 profhz=0 wd0 at atabus0 drive 0: <TOSHIBA MK4019GAX> wd0: drive supports 16-sector PIO transfers, LBA addressing wd0: 38154 MB, 77520 cyl, 16 head, 63 sec, 512 bytes/sect x 78140160 sectors wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) boot device: <unknown> root device: wd0a dump device (default wd0b): file system (default generic): root on wd0a dumps on wd0b mountroot: trying ffs... root file system type: ffs WARNING: clock gained 3 days WARNING: CHECK AND RESET THE DATE! init path (default /sbin/init): init: copying out path `/sbin/init' 11