Renesas Technology Corp. R0P7785LC0011RL

NetBSD evbsh3

re(4) 動いた記念。

=> rarpboot
RARP broadcast 1
*** Warning: no boot file name; using 'C0A800C8.img'
Using RTL8169#0 device
TFTP from server 192.168.0.2; our IP address is 192.168.0.200
Filename 'C0A800C8.img'.
Load address: 0x9000000
Loading: #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         ###############################
done
Bytes transferred = 6177092 (5e4144 hex)
=> g 0x9000000
## Starting application at 0x09000000 ...
load 8000000-8fff000
load 9000000-10000000
wired entry: 57-63
writeback virtual alias way=4

Loaded initial symtab at 0x89164dfc, strtab at 0x89185584, # entries 7783
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.99.24 (RENESAS7785LCR) #103: Thu Mar 25 21:37:12 JST 2010
        nonaka@koharu.myhome.local:/home/source/NetBSD/src-sh4a/sys/arch/evbsh3/compile/RENESAS7785LCR
general exception handler:      324 byte
TLB miss exception handler:     272 byte
interrupt exception handler:    288 byte
total memory = 127 MB
avail memory = 119 MB
Renesas evaluation board R0P7785LC0011RL
mainbus0 (root)
cpu0 at mainbus0: SH4A 599.999 MHz PCLOCK 49.999 MHz
cpu0: 32KB/32B 4-way set-associative Instruction cache.
cpu0: 32KB/32B 4-way set-associative Data cache.
cpu0: U0, P0, P3 write-back; P1 write-back
cpu0: full-associative 4 ITLB, 64 UTLB entries
cpu0: multiple virtual storage mode, SQ access: kernel, wired 7
cpu0: 29bit physical address mode. TLB-compatible mode.
shb0 at mainbus0
scif0 at shb0
scif0: console
shpcic0 at mainbus0
pci0 at shpcic0
re0 at pci0 dev 0 function 0: RealTek 8169/8110 Gigabit Ethernet (rev. 0x10)
re0: interrupting at irq 0
re0: Ethernet address XX:XX:XX:XX:XX:XX
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 2
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
satalink0 at pci0 dev 1 function 0: Silicon Image SATALink 3512 (rev. 0x01)
satalink0: using irq 1 for native-PCI interrupt
atabus0 at satalink0 channel 0
atabus1 at satalink0 channel 1
root on md0a dumps on md0b
mountroot: trying ffs...
root file system type: ffs
WARNING: no TOD clock present
WARNING: using filesystem time
WARNING: CHECK AND RESET THE DATE!
init: copying out flags `-s' 3
init: copying out path `/sbin/init' 11
erase ^?, werase ^W, kill ^U, intr ^C

mount_kernfs: kernfs on /kern: Operation not supported by device
# ifconfig re0 192.168.0.201
# route add default 192.168.0.254
add net default: gateway 192.168.0.254
# ping 192.168.0.254
PING 192.168.0.254 (192.168.0.254): 56 data bytes
64 bytes from 192.168.0.254: icmp_seq=0 ttl=64 time=2.315 ms
64 bytes from 192.168.0.254: icmp_seq=1 ttl=64 time=1.880 ms
64 bytes from 192.168.0.254: icmp_seq=2 ttl=64 time=1.437 ms
64 bytes from 192.168.0.254: icmp_seq=3 ttl=64 time=1.801 ms
64 bytes from 192.168.0.254: icmp_seq=4 ttl=64 time=1.583 ms
64 bytes from 192.168.0.254: icmp_seq=5 ttl=64 time=1.537 ms
64 bytes from 192.168.0.254: icmp_seq=6 ttl=64 time=1.985 ms
64 bytes from 192.168.0.254: icmp_seq=7 ttl=64 time=1.416 ms
64 bytes from 192.168.0.254: icmp_seq=8 ttl=64 time=1.597 ms
64 bytes from 192.168.0.254: icmp_seq=9 ttl=64 time=1.464 ms
^C
----192.168.0.254 PING Statistics----
10 packets transmitted, 10 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 1.416/1.702/2.315/0.290 ms
#